Blazor WASM auth

[robotdan]

Assuming this is the same issue / thread as this SO issue ?
https://stackoverflow.com/questions/64877185/blazor-wasm-to-work-with-testing-local-auth-server

[ethalacker]

@robotdan Yes it is the same. We can continue the discussion here.

[jphelps]

Thanks for your help and responses @robotdan!

@ethalacker and I have been going over this and we believe we understand why things are working the way they are.

The Origin header is not being sent by the Blazor authentication system which is based on odic-client.js. Since the requests are coming from ajax/XHR and the Sec-Fetch-Mode header is navigate, the browser will not include the Origin header according to the Fetch API. Thus there is not a header for Fusion Auth to check.

What I do find a bit confusing is the following. Why does Fusion Auth return the full login page html with an X-Frame-Options header with DENY, if it can see Sec-Fetch-Dest header is iframe and there is not a Origin header to check against the Authorized request origin URLs . It would make more sense to me to return a 302 redirect to the application login callback.

We have tested our application against several oidc providers, and the other providers do a 302 redirect to the application login callback.

[robotdan]

@jphelps said in Blazor WASM auth:

Sec-Fetch-Dest

We do not currently do anything with the Sec-Fetch-Dest header. This header doesn't look to be a widely supported, and even if we did look at this header, I don't understand how this would help. Doesn't this header just indicate the intended use?

Is this a test setup, or do you plan to run this all on localhost in production as well? I would assume that if the fetch request thought it was making a request to a different host it may add the Origin header?

I don't know what this means yet but in section 3.1 fo the Fetch spec it says the Origin header is not included in all fetches. I couldn't find any specific scenarios spelled out where it won't be sent.

The Origin header is a version of the Referer [sic] header that does not reveal a path. It is used for all HTTP fetches whose request’s response tainting is "cors", as well as those where request’s method is neither GET nor HEAD. Due to compatibility constraints it is not included in all fetches.

Regarding your question,

What I do find a bit confusing is the following. Why does Fusion Auth return the full login page html with an X-Frame-Options header with DENY, if it can see Sec-Fetch-Dest header is iframe and there is not a Origin header to check against the Authorized request origin URLs . It would make more sense to me to return a 302 redirect to the application login callback.

I suppose this is an option, in general we prefer to fail in such a way that it indicates something is wrong. If we redirect w/out a failure - the developer may not know there is a configuration error.

How would returning 302 assist you in your integration?

[kern.markus]

@jphelps @dan @ethalacker
I am currently struggling with the same scenario. How did you actually get it to work? Could you put it up as a sample project perhaps?

[kern.markus]

@kern-markus
@robotdan
@ethalacker

Hello. I have the same problem.
I am trying to make a local FusionAuth work with a .Net 7 Blazor WebAssembly project.

I have the following settings:

"FusionAuth": {
  "Authority": "http://localhost:9011/",
  "ClientId": "dc0ea808-5644-42af-b8de-718a71683959",
  "ClientSecret": "gKqlvcI8TB5qJi89rNksKbrOOWbVx5UE0FNLBPc2AEI",
  "RedirectUri": "https://localhost:7281/authentication/login-callback",
  "PostLogoutRedirectUri": "https://localhost:7281/authentication/logout-callback",
  "ResponseType": "code"
}

I get:

Access to XMLHttpRequest at 'http://localhost:9011/.well-known/openid-configuration' from origin 'https://localhost:7281' has been blocked by CORS policy: No 'Access-Control-Allow-Origin' header is present on the requested resource.

I have previously managed to make my local FusionAuth work with the MVC sample project.
Could I please get some guidance as to what to do about this?

[mark.robustelli]

@kern-markus Hello. Are these still the right steps to replicate your specific issue?

@ethalacker said in Blazor WASM auth:

To Replicate

Use the new .NET 5 sdk.
dotnet new blazorwasm -au Individual -o BlazorAuthSample5 in the CLI/powershell
copy my Program.cs into yours. Only a few lines added/replaced.
change wwwroot/appsettings.json to include your fusionAuth clientId
dotnet run on folder and try to login

Is there anything else you want to add? Once I get confirmation, I will try to recreate on my end.

[kern.markus]

@mark-robustelli

Thank you!
That should be correct yes, except I am using .Net 7.

[kern.markus]

@mark-robustelli
Any new insights?
Best regards
Markus

[kern.markus]

@kern-markus
@mark-robustelli
@ethalacker
@robotdan

Any progress on this? Is it possible that a workaround with some inserted javascript would help?

[mark.robustelli]

@kern-markus Sorry, I haven't had a chance to test this out yet. I hope to get to some time later this week. I will let you know what I find.

[kern.markus]

@mark-robustelli
Thanks for getting back in touch! I am also back on this problem just now.
I have got the authorization step working with this CORS setting:

However, something doesn't work on the redirect back. I get 'There was an error signing in', even though I get a response with a token. I am troubleshooting this right now.

[kern.markus]

@mark-robustelli

Ah, yes, it's this error that I have seen mentioned in the threads before:

Access to XMLHttpRequest at 'http://localhost:9011/oauth2/userinfo' from origin 'https://localhost:7281' has been blocked by CORS policy: Response to preflight request doesn't pass access control check: No 'Access-Control-Allow-Origin' header is present on the requested resource.

Is there a way to get around this problem? This seems to be the real stumbling block people have had if I understand correctly?

[kern.markus]

@mark-robustelli

So. I think I have an understanding of the actual issue now. After reading this post on Stack Overflow:

https://stackoverflow.com/a/65859787

It seems to me that there is a CORS setting that is needed on the FusionAuth API side if it is going to work with Blazor WebAssembly at all, and that setting is not currently available in configuration?
So if I understand correctly, if we want to get FusionAuth to work with our Blazor solution, the only available option is a workaround: to implement authorization in our API instead.

Can you confirm this? We need to get working on the workaround ASAP in that case, so a quick confirm and an indication to the right sample code would be very valuable.

[mark.robustelli]

@kern-markus in the above, with the steps to reproduce, can you have share what you have in your builder.Services.AddOidcAuthentication function? Please remember to replace any sensitive information before sharing for things like client secret or anything of that nature.

[mark.robustelli]

@kern-markus, After spending far to long with this issue I was able to get the full page redirect to re-route to FusionAuth, allow me to login, and the send be back to the sample app. The app seems to get stuck on 'Completing login...' however. I'm not sure what that is about, but I can see in the URL that the login has occurred.

https://localhost:7055/authentication/login-callback#locale=en&scope=openid+profile&state=7cb3f5fc78db4d27b679d45ba415fc5c&userState=Authenticated&id_token=eyJhbGciOiJI....

I think this has to do with the WASM app rather than fusion AUTH at this point. Are you at least able to make it that far?

[kern.markus]

@mark-robustelli

Thank you.
I came a step further than that. I get logged in but get the error message I described above:
Response to preflight request doesn't pass access control check: No 'Access-Control-Allow-Origin' header is present on the requested resource.

And when I googled around a bit more I came to the stackoverflow thread I linked in my last post before this one, which I understand to tell me that there is no way around this problem unless FusionAuth makes changes to CORS settings on your side.
So what I need now is basically a confirm of this or an explanation of how to get around that particular problem.

[kern.markus]

@mark-robustelli

Here's my current settings and code:

"FusionAuth": {
  "Authority": "http://localhost:9011/",
  "ClientId": "[id]",
  "ClientSecret": "[secret]",
  "RedirectUri": "https://localhost:7281/authentication/login-callback",
  "PostLogoutRedirectUri": "https://localhost:7281/authentication/logout-callback",
  "ResponseType": "code"
},

builder.Services
    .AddOidcAuthentication(options =>
    {
        builder.Configuration.Bind("FusionAuth", options.ProviderOptions);
        options.ProviderOptions.DefaultScopes.Add("openid");
    });

[mark.robustelli]

@kern-markus , my best guess at this point is that you are right in that it comes down to the way the request is sent and not having the expected headers to allow the CORS. I don't see any open issues for FusionAuth that may implement the suggested changes and I am not aware of a workaround other than to change the technology used for the application or insert some sort of proxy that can add the appropriate headers.

[kern.markus]

@mark-robustelli

Thank you!